BOBICAB II mecanique

DESCRIPTION AND CHARACTERISTICS :

First put in service: Between 1988 and 1993

Optional: sold as is or completely revised and updated to comply with new safety standards.

PRESENTATION :

For the packaging of cables up to 50mm in diameter.

Very quick changeover for packaging on coiling head or cable drum.

Compact, one-piece, mechanically welded chassis equipped with 4 wheels, 2 of them directional.

Cable drums positioned between points with lifting system by handwheel and chain, held in working position by ratchet system.

Motorised reeling with direct current of 1kW with an electronic inverter for a speed between 0 and 60t/mn.

Cable drum held on spindles, with reeling by adjustable spindle drive.

Coiling head for producing reels without any disassembly.

Positioned in place of the cable drum by 180° rotation of the coiling head.

Winding of cable drums Ø maximum exterior 1200mm, maximum width 820mm and maximum weight 900 kg.

Supply voltage: 220 V mono 50 Hz + earth: 2 kW.

Manual traversing with infeed and outfeed cable guides.

Features new electronic measuring device with a double preselection allowing quick winding then slowing before automatically stopping at the preselected length.

Information and prices :
Phone: +33 (0)5 53 88 70 87.
Email : contact@drouaire.com or via the website form

BOUHARMONT 880 CT

DESCRIPTION AND CHARACTERISTICS :

First put in service: 1989.

Last revised: 07/10/2008.

Sold: Completely reviewed and restored to comply with new safety standards.

PRESENTATION :

For packing cables up to 45mm in diameter.

Very quick changeover for packaging on coiling head or cable drum.

Mechanically-welded chassis equipped with 4 wheels, 2 of them directional, and a ground locking system.

Lifting and lowering by manual hydraulic pump.

Manual clamping and release of spindles.

Cable drum taken between points with reeling by 3 steel points.

Coiling head for producing reels without any disassembly. Operator shielded from the rotating coiling head by protective casing.

Winding of cable drums Ø maximum exterior 1200mm, maximum width 820mm and maximum weight 800kg.

Motorised reeling of 1.5kW for a speed between 0 and 60t/mn.

The mobile trolley enables traversing with infeed and outfeed cable guides.

Features mechanical measuring device with a double preselection allowing quick winding then slowing before automatically stopping at the preselected length.

Calibrated measuring wheel where 2 turns = 1 metre.

No cable-cutting system.

Power supply 220 V single-phased + E.

Information and prices :
Phone: +33 (0)5 53 88 70 87.
Email : contact@drouaire.com or via the website form

Triangulated lifting unit 2200×1900

DESCRIPTION AND CHARACTERISTICS :

PRESENTATION :

WINDING ROLLER

Mechanically-welded chassis.

Lifting and clamping of spindles with double-action hydraulic pistons.

Cable drums suitable for this roller:

Ø minimum: 600mm,

Ø maximum: 1900mm,

Minimum width: 380mm,

Maximum width: 1200mm,

Maximum load: 2500 kg.

Coiling head for reel formation.

Cable drum spindles with a central hole Ø 82 with adjustment cone in case of misalignment.

Optional electronic traversing, proportional to the winding.

Infeed and outfeed guidance with diaphragm-type cable guides.

Motorised 6-wheel measuring device to guarantee extreme precision, particularly on coiled cables.

Cable-cutting by double-action hydraulic shears TC 120, for cables of Ø 110mm maximum.

UNWINDING ROLLER

Mechanically welded chassis.

Cable drums allowed on the roller:

Ø minimum: 900mm,

Ø maximum: 2200mm,

Minimum width: 380mm,

Maximum width: 1400mm,

Maximum load: 4000 kg.

SIZE

Length: 6.5 metres.

Width: 3.5 metres.

Height: 2.85 metres.

Information and prices :
Phone: +33 (0)5 53 88 70 87.
Email : contact@drouaire.com or via the website form